NSN 3040-01-609-6034 · NIIN 016096034 · FSC 3040
NO DASHES 3040016096034
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: DRAGONSPEAR
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSQZ | FIRST END STEP LENGTH | INCHES NOMINAL 0.470 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 0.622 AND INCHES MAXIMUM 0.623 |
| ATPC | STEP QUANTITY | 2 |
| MATT | MATERIAL | STEEL COMP 304 |
| AAHN | END SIMILARITY | IDENTICAL |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 6.360 |
| ACKY | FIRST END WIDTH ACROSS FLATS | INCHES MINIMUM 0.551 AND INCHES MAXIMUM 0.554 |
| AGAV | END ITEM IDENTIFICATION | DRAGONSPEAR |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.622 AND INCHES MAXIMUM 0.623 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AAGZ | FIRST END STYLE | |
| FEAT | SPECIAL FEATURES | SHAFT HAS A GROVE 3.94 INCHES LONG CENTERED IN THE LENGTH OF THE SHAFT. EACH END IS ROUNDED USING A RADIUS EQUAL TO 1/2 OF THE GROOVE WIDTH. GROOVE IS 0.125 WIDE AND 0.186 DEEP. THE GROOVE ALSO HAS TWO HOLES THAT PASS THROUGH IT AND THE ENTIRE SHAFT. THESE HOLES ARE 2.805 INCHES FROM THE END OF THE SHAFT TO THE HOLE CENTER. THEY ARE 0.257 IN DIAMETER. THIS LEAVES THEM 0.750 BETWEEN CENTER. |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,GEAR,FEEDER |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 94477 | 07609 |