NSN 3040-01-626-5740 · NIIN 016265740 · FSC 3040
NO DASHES 3040016265740
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: VARIOUS C5
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | VARIOUS C5 |
| AMEL | FIRST END BEARING SEAT DIAMETER | INCHES MINIMUM 0.450 AND INCHES MAXIMUM 0.460 |
| AMEP | FIRST END DISTANCE FROM BEARING SEAT TO END | INCHES NOMINAL 0.020 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.24 AND INCHES MAXIMUM 0.26 |
| ATPC | STEP QUANTITY | 1 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 0.450 AND INCHES MAXIMUM 0.460 |
| CSYM | SURFACE FINISH | MICROINCHES 125.0 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255 |
| AMEJ | FIRST END BEARING SEAT LENGTH | INCHES NOMINAL 0.060 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.155 AND INCHES MAXIMUM 0.165 |
| AAGZ | FIRST END STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763, CONDITION H |
| FEAT | SPECIAL FEATURES | SHAFT HAS A 0.030 INCH DIAMETER THRU HOLE. SHAFT IS PASSIVATED PER MIL-S-5002. |
| MATT | MATERIAL | STEEL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPRING GUIDE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 16172 | 06177 |