NSN 3040-01-722-2569 · NIIN 017222569 · FSC 3040
NO DASHES 3040017222569
In Stock
GEARSHAFT,HELICAL
Miscellaneous Power Transmission Equipment
Application: WEAPONS HANDLING ANTWARTSHIP DRIVE GEAR ASSEMBLY
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYET | SHAFT LARGEST DIAMETER | INCHES MINIMUM 1.1257 AND INCHES MAXIMUM 1.1262 |
| CYER | GEAR MATERIAL | NICKEL ALLOY |
| ANJS | SHAFT END TYPE | KEYWAY WOODRUFF |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 6.054 AND INCHES MAXIMUM 6.084 |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWNM | TOOTH DIRECTION | RIGHT |
| AJLA | TEETH QUANTITY | 25 |
| AJWS | GEAR OUTSIDE DIAMETER | INCHES MINIMUM 2.265 AND INCHES MAXIMUM 2.270 |
| CYEV | LONGER SHAFT SEGMENT LENGTH | INCHES MINIMUM 3.79 AND INCHES MAXIMUM 3.81 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CYEQ | SHAFT MATERIAL | NICKEL ALLOY |
| CYEU | GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 6.054 AND INCHES MAXIMUM 6.084 |
| AGAV | END ITEM IDENTIFICATION | WEAPONS HANDLING ANTWARTSHIP DRIVE GEAR ASSEMBLY |
| AQPL | FACE WIDTH | INCHES MINIMUM 1.498 AND INCHES MAXIMUM 1.502 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | GEAR, HELICAL 25T, 30 DEG LH |
| CRSJ | SHAFT TYPE | SHOULDERED |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 752-8843546 | 53711 |
| 752-8843546-44 | 53711 |
| 218113670 | 96169 |
| LOA042367-44 | 96169 |
| R8321651-44 | 96169 |