NSN 3040-01-725-5856 · NIIN 017255856 · FSC 3040
NO DASHES 3040017255856
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMFZ | SECOND END DIAMETER | INCHES NOMINAL 20.000 |
| CSQZ | FIRST END STEP LENGTH | INCHES NOMINAL 13.000 |
| AMHD | SECOND END HOLE DEPTH | INCHES NOMINAL 3.500 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S5659 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CTBM | SECOND END STEP LENGTH | INCHES NOMINAL 3.500 |
| AMGS | SECOND END HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 2.380 |
| FEAT | SPECIAL FEATURES | END 1 THREAD 1-8UNC-2B, END 1 CHAMFER 0.25 INCH X 45.0 DEGREES, END 2 10X THRU HOLE CIRCLE DIAMETER 16.0 INCH WITH 36.0 DEGREES BETWEEN HOLE CENTERS, HOLES ARE ON THE END FLAT SURFACE AND THRU THE FLANGE |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 20.500 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 7.995 AND INCHES MAXIMUM 8.000 |
| AMER | FIRST END INTERNAL THREAD LENGTH | INCHES MINIMUM 2.000 |
| AAGZ | FIRST END STYLE | |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AMHZ | SECOND END ANGLE BETWEEN HOLES | DEGREES NOMINAL 36.0 |
| ATPC | STEP QUANTITY | 2 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 20.000 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 67DP-20974-12 | 06742 |
| 67DP-20974-01 | 06742 |