NSN 5990-00-794-5870 · NIIN 007945870 · FSC 5990
NO DASHES 5990007945870
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 9.50 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.0690 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 2.4440 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 132.00 |
| CQZS | SHAFT SLOT DEPTH | BOTH SHAFTS INCHES MINIMUM 0.0210 AND INCHES MAXIMUM 0.0310 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 22.80 |
| CRHN | SHAFT SLOT WIDTH | BOTH SHAFTS INCHES MINIMUM 0.0210 AND INCHES MAXIMUM 0.0310 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 14.70 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 15.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 5.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 3.80 |
| AJVF | PHASE SHIFT ANGLE IN DEG | OUTPUT TO INPUT NOMINAL 4.500 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.5910 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 5.80 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 23.60 |
| AJTE | ZSO-90 RESISTANCE IN OHMS | NOMINAL 3.60 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 23.00 |
| CRSJ | SHAFT TYPE | BOTH SHAFTS ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.1250 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8750 |
| CTDW | PLUS J ZSO-90 REACTANCE IN OHMS | NOMINAL 7.30 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 1.2 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 225.0 |
| ABXF | SHAFT LENGTH | BOTH SHAFTS INCHES MINIMUM 0.3750 AND INCHES MAXIMUM 0.4780 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABWV | SHAFT DIAMETER | BOTH SHAFTS INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| AJSL | BODY SIZE | 15 |