NSN 3110-00-953-4495 · NIIN 009534495 · FSC 3110
NO DASHES 3110009534495
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGYE | SURFACE FINISH | GROUND |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| STYL | STYLE DESIGNATOR | |
| AGZH | INTERNAL FIT-UP DESIGNATION | TIGHT |
| ABXV | BORE DIAMETER | MILLIMETERS NOMINAL 35.00 |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZD | BORE SHAPE | STRAIGHT |
| MATT | MATERIAL | RETAINER STEEL |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 3.9990 AND INCHES MAXIMUM 4.0000 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 1.1150 AND INCHES MAXIMUM 1.1250 |
| AGVU | INNER RING WIDTH | MILLIMETERS NOMINAL 21.00 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE ALVANIA 3,FSC- 54527 |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| FEAT | SPECIAL FEATURES | INNER RING ROUNDED ON BOTH SIDES 0.060 IN. RADIUS; OUTER RING CHAMFERED 0N INSIDE 0.031 IN. WIDE BY 60 DEG; OUTER RING ROUNDED ON OUTSIDE 0.060 IN. RADIUS ON SIDE WITH PART NO. MARKING,0.375 IN. RADIUS ON NONMARKED SIDE |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | RADIAL |
| AGYJ | SEAL QUANTITY | 2 |
Supersedes
This item replaces cancelled NIINs 002416745 · 002319743. An older drawing citing one of those numbers resolves here.