NSN 3130-00-838-5639 · NIIN 008385639 · FSC 3130
NO DASHES 3130008385639
In Stock
BEARING UNIT,ROLLER
Bearings, Mounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES MINIMUM 0.5856 AND INCHES MAXIMUM 0.5906 |
| ANJS | SHAFT END TYPE | OPEN |
| AFWC | HOUSING HEIGHT | INCHES MINIMUM 2.8300 AND INCHES MAXIMUM 2.8340 |
| AFWD | HOUSING LENGTH | INCHES MINIMUM 0.5856 AND INCHES MAXIMUM 0.5906 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AMCL | BLOCK TYPE | FIXED |
| AFWE | HOUSING WIDTH | INCHES MINIMUM 2.8300 AND INCHES MAXIMUM 2.8340 |
| MATT | MATERIAL | RETAINER STEEL COMP 4340 |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZH | INTERNAL FIT-UP DESIGNATION | LOOSE |
| ABJH | TEMP RATING | FAHRENHEIT 600.0 |
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 3.1000 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.1000 AND INCHES MAXIMUM 0.1050 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.2160 AND INCHES MAXIMUM 0.2260 |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | HOUSING MFR REF SINGLE MATERIAL RESPONSE CW 54 FSC- 00198 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER ASSN STD SINGLE MATERIAL RESPONSE A-S 6414 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROLLER MFR REF SINGLE MATERIAL RESPONSE CW 54 FSC- 00918 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.5746 AND INCHES MAXIMUM 1.5748 |
| AFWB | HOUSING DIAMETER | INCHES MINIMUM 2.6769 AND INCHES MAXIMUM 2.6772 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | STRAIGHT SLEEVE |
| MATT | MATERIAL | ROLLER STEEL |
| MATT | MATERIAL | HOUSING STEEL |
| FEAT | SPECIAL FEATURES | FOUR HOLES ON FLANGE EQUALLY SPACED,0.1400 IN. MIN AND 0.1500 IN. MAX DIA; RBEC 5; SILVER PLATE RIDING SURFACES AND ROLLER POCKETS PER AMS 2412; RADIAL CLEARANC 0.0025 IN. MIN AND 0.0035 IN. MAX; ETCH AND MAGNETIC PARTICLE INSPECTION |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
Supersedes
This item replaces cancelled NIIN 004037587. An older drawing citing one of those numbers resolves here.