NSN 5905-00-846-0212 · NIIN 008460212 · FSC 5905
NO DASHES 5905008460212
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 10 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 100.0 |
| AEDX | SHAFT STYLE | |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 1.219 AND INCHES MAXIMUM 1.281 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.364 AND INCHES MAXIMUM 0.386 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.308 AND INCHES MAXIMUM 1.423 |
| AEGJ | SWITCH CONTACT ARRANGEMENT | DOUBLE POLE, SINGLE THROW, NORMALLY CLOSED |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 1.0 |
| CBBL | FEATURES PROVIDED | SWITCH |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| CQPH | DEVICE DESIGN TYPE | AT 9:00 OCLOCK NONTURN |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.186 AND INCHES MAXIMUM 0.188 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 0.953 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.264 AND INCHES MAXIMUM 0.266 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CQTM | TERMINAL LOCATION | REAR-BOTTOM |
| ARNH | OPERATING POSITION | START OF ROTATION |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| AEEA | SWITCH TYPE | ROTARY |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 150.0 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.422 AND INCHES MAXIMUM 0.454 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -20.0 TO 20.0 |
| AGQL | UNDERCUT LENGTH | INCHES NOMINAL 0.500 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
Supersedes
This item replaces cancelled NIIN 007210677. An older drawing citing one of those numbers resolves here.