NSN 3110-00-012-0483 · NIIN 000120483 · FSC 3110
NO DASHES 3110000120483
In Stock
BEARING,BALL,AIRFRAME
Bearings, Antifriction, Unmounted
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2497 AND INCHES MAXIMUM 0.2500 |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.5595 AND INCHES MAXIMUM 0.5620 |
| AGZC | LOAD DIRECTION | RADIAL |
| FEAT | SPECIAL FEATURES | 0.0001 IN. MIN 0.0005 IN. MAX RADIAL CLEARANCE UNDER 2.2 LB LOAD AND 0.0020 IN. AXIAL PLAY UNDER 5.5 LB LOAD,OUTWARD CONVERGENT CONTACT ANGLE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | BALL STEEL |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.6246 AND INCHES MAXIMUM 0.6250 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.4950 AND INCHES MAXIMUM 0.5000 |
| MATT | MATERIAL | RETAINER STEEL |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| SFTT | SURFACE TREATMENT | ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM |
| STYL | STYLE DESIGNATOR | |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MDW4K2FS160 | 21335 |
| MDW4K2 | 21335 |
| MDW4K2FS428 | 21335 |
| MDWK2FS428 | 21335 |
| C707MDW4K2 | 21335 |
| C707MDW4K2 | 3NPS1 |
| MDW4K2FS428 | 3NPS1 |
| C707MDW4K2 | 81755 |