NSN 3110-00-043-2689 · NIIN 000432689 · FSC 3110
NO DASHES 3110000432689
In Stock
BEARING,ROLLER,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.3750 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.7800 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.2500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 0.8000 |
| AGGY | SHANK THREAD LENGTH | INCHES NOMINAL 0.7500 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.3500 |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 0.4370 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES NOMINAL 1.3800 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYK | SHIELD QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| FEAT | SPECIAL FEATURES | WITH FLUSH TYPE GREASE FITTING |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4620 |
| MATT | MATERIAL | ROLLER STEEL COMP E52100 |
| MATT | MATERIAL | SEAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| MATT | MATERIAL | SHIELD STEEL COMP 430 |
| MATT | MATERIAL | SNAP RING STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7493 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROLLER MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHIELD FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| SFTT | SURFACE TREATMENT | ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ALL EXTERNAL/EXPOSED METAL SURFACES FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |