NSN 3110-00-057-4556 · NIIN 000574556 · FSC 3110
NO DASHES 3110000574556
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | MILLIMETERS NOMINAL 55.00 |
| ADGA | OVERALL OUTSIDE DIAMETER | MILLIMETERS NOMINAL 90.00 |
| AGVT | OUTER RING WIDTH | MILLIMETERS NOMINAL 18.00 |
| AGVU | INNER RING WIDTH | MILLIMETERS NOMINAL 22.00 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM AXIAL 0.0090 AND INCHES MAXIMUM AXIAL 0.0110 AND INCHES MINIMUM RADIAL 0.0016 AND INCHES MAXIMUM RADIAL 0.0035 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| FEAT | SPECIAL FEATURES | MAX BALL DIA VARIATION IN ANY ONE BEARING 0.000020 IN.; STABILIZED FOR OPERATION AT 250 DEG F; MAX SURFACE FINISH,ID OF INNER RING AND OD OUTER RING 16 MICROINCHES AA BALL POCKET 30 MICROINCHES AA,RETAINER LAND RIDING SURFACE 50 MICROINCHES AA INNER AND OUTER RACEWAYS 13 MICROINCHES AA; PULLER GROOVE LOCATED ON INNER RING,0.070 IN. TO 0.090 IN. DEEP,0.070 IN. TO 0.090 IN. W,LOCATED 0.070 IN. TO 0.090 IN. FROM EXTENDED END |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| MATT | MATERIAL | RETAINER COPPER ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MFR REF SINGLE MATERIAL RESPONSE -4001,FSC- 91547 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MFR REF SINGLE MATERIAL RESPONSE -4001,FSC- 91547 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MFR REF SINGLE MATERIAL RESPONSE -4001,FSC- 91547 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER MFR REF SINGLE MATERIAL RESPONSE -3900,FSC- 91547 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 6903-91547 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 9111UK300 | 38443 |
| D3-45981 | 38443 |
| 452978 | 52676 |
| 1-300-023-03 | 78U39 |
| 1-300-023-02 | 78U39 |
| 1-300-023-02 | 99193 |
| 1-300-023 | 99193 |
| 1-300-023-03 | 99193 |
Supersedes
This item replaces cancelled NIIN 008443335. An older drawing citing one of those numbers resolves here.