NSN 3110-00-068-8119 · NIIN 000688119 · FSC 3110
NO DASHES 3110000688119
In Stock
BEARING,BALL,BELL CRANK
Bearings, Antifriction, Unmounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | BORE CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ALL EXTERNAL/EXPOSED METAL SURFACES FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 2 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER STEEL COMP E52100 |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL ASSN STD SINGLE MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER ASSN STD SINGLE MATERIAL RESPONSE AISI |
| SFTT | SURFACE TREATMENT | ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM |
| ABXV | BORE DIAMETER | INCHES MAXIMUM 0.3125 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 1.6770 AND INCHES MAXIMUM 1.6970 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| STYL | STYLE DESIGNATOR | |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.5570 AND INCHES MAXIMUM 0.5670 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.6820 AND INCHES MAXIMUM 0.6870 |
| AGVV | OUTER RING OUTSIDE DIAMETER | INCHES MINIMUM 0.8650 AND INCHES MAXIMUM 0.8850 |
| AGVY | RIVET HOLE DIAMETER | INCHES MINIMUM 0.1400 AND INCHES MAXIMUM 0.1450 |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZR | RIVET HOLE QUANTITY | 12 |
| CMPM | DISTANCE BETWEEN FLANGE HOLE CENTERS | INCHES MINIMUM 1.3750 AND INCHES MAXIMUM 1.3800 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BCP5W11FS302 | 21335 |
| BCP5W11FS302 | 3NPS1 |
| MS20218-2 | 96906 |