NSN 3110-00-076-8799 · NIIN 000768799 · FSC 3110
NO DASHES 3110000768799
In Stock
BEARING,BALL,THRUST
Bearings, Antifriction, Unmounted
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OUTER RING STEEL |
| MATT | MATERIAL | RETAINER COPPER ALLOY |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| AGZQ | THRUST DIRECTIONAL CAPABILITY DESIGNATION | SINGLE |
| FEAT | SPECIAL FEATURES | ROCKWELL HARDNESS C SCALE 56.0 TO64.0 RINGS AND BALLS,BALLS RETAINED BY RING STAKED AROUND EACH BALL ON BOTH SIDES OF RETAINER,RING FACES PARALLEL WITHIN 0.001 IN. TIR,LUBRICATED W/MIL-L-6081,GR 1010 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.1855 AND INCHES MAXIMUM 0.1875 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.4950 AND INCHES MAXIMUM 0.5000 |
| AGWJ | BORE SMALLEST DIAMETER | INCHES NOMINAL 0.1248 |
| AGWK | LARGEST BORE DIAMETER | INCHES NOMINAL 0.1250 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZA | ALIGNMENT TYPE | RIGID |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER MFR REF SINGLE MATERIAL RESPONSE 526712,73030 |
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 009782178. An older drawing citing one of those numbers resolves here.