NSN 3110-00-085-9057 · NIIN 000859057 · FSC 3110
NO DASHES 3110000859057
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHAW | SELF-ALIGNMENT LOCATION | EXTERNAL |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AGZD | BORE SHAPE | STRAIGHT |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | LABYRINTH |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZC | LOAD DIRECTION | RADIAL |
| MATT | MATERIAL | SEAL WOOL |
| ABXV | BORE DIAMETER | INCHES MAXIMUM 1.3755 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 2.8340 AND INCHES MAXIMUM 2.8346 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.9325 AND INCHES MAXIMUM 0.9375 |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 1.6875 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| MATT | MATERIAL | RETAINER STEEL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE DOD-G-24508 |
| STYL | STYLE DESIGNATOR | |
| LBMA | LUBRICATION MATERIAL | GREASE |
| FEAT | SPECIAL FEATURES | LUB AND LOCKING PIN HOLE IN OUTER RING ALSO TWO 0.3125 IN. -26 SETSCREWS LOCATED 120 DEG C TO C IN LONG END OF INNER RING |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2-16 | 57448 |