NSN 3110-00-125-5685 · NIIN 001255685 · FSC 3110
NO DASHES 3110001255685
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | MILLIMETERS NOMINAL 6.0 |
| ABXV | BORE DIAMETER | MILLIMETERS NOMINAL 5.00 |
| ADGA | OVERALL OUTSIDE DIAMETER | MILLIMETERS NOMINAL 19.00 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0002 AND INCHES MAXIMUM RADIAL 0.0005 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE ANDOK C,FSC- 29700 |
| MATT | MATERIAL | BALL STEEL CORROSION RESISTING |
| MATT | MATERIAL | INNER RING STEEL CORROSION RESISTING |
| MATT | MATERIAL | OUTER RING STEEL CORROSION RESISTING |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3145992 | 23892 |
| 2154328 | 30874 |
| SSZ99035XR3C | 43334 |
| A-A-59581 | 58536 |
| AA59581-235JEFL | 58536 |
Supersedes
This item replaces cancelled NIIN 005901001. An older drawing citing one of those numbers resolves here.