NSN 3110-00-133-6554 · NIIN 001336554 · FSC 3110
NO DASHES 3110001336554
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.2510 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.1877 |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0017 AND INCHES MAXIMUM RADIAL 0.0024 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 9P |
| CTHQ | BEARING PRELOAD RATING | POUNDS NOMINAL 1.0 |
| CTHY | CONTACT ANGLE | DEGREES MINIMUM 19.4 AND DEGREES MAXIMUM 26.8 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE SAE |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SPCL | SPECIAL TEST FEATURES | VIBRATION TESTED |
| STYL | STYLE DESIGNATOR | |
| AGVV | OUTER RING OUTSIDE DIAMETER | INCHES NOMINAL 0.5632 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYK | SHIELD QUANTITY | 2 |
| FEAT | SPECIAL FEATURES | RETAINER VACUUM IMPREGNATED WITH OIL; 10 TO 15 MG OF SPECIFIED LUBRICANT; LUBRICATION MATERIAL IS PER MIL-G-81322 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER PLASTIC PHENOLIC |
| MATT | MATERIAL | SHIELD STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL ASSN STD SINGLE MATERIAL RESPONSE SAE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE MATERIAL RESPONSE SAE |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 0.0580 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 0.6300 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| A516-801 | 40920 |
| 30424-1 | 40920 |
| A516-812 | 40920 |
| 30424 | 50027 |
| 30424-1 | 50294 |
| 30424-1 | 50027 |
| 30424-1 | 70854 |
| Z126X19SA4293 | 70854 |
| Z126X19V-28G-33 30-45MG | 70854 |
| Z126X19V11G38 | 70854 |
Supersedes
This item replaces cancelled NIIN 010498434. An older drawing citing one of those numbers resolves here.