NSN 3110-00-143-3017 · NIIN 001433017 · FSC 3110
NO DASHES 3110001433017
In Stock
BEARING,ROLLER,AIRFRAME
Bearings, Antifriction, Unmounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.2500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 1.2500 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.7500 |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 1.0000 |
| AGYF | RETAINER FABRICATION METHOD | CAST |
| AGYJ | SEAL QUANTITY | 2 |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER COPPER ALLOY |
| MATT | MATERIAL | SEAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| MATT | MATERIAL | SHAFT STEEL COMP E52100 |
| MATT | MATERIAL | SHIELD STEEL COMP 430 |
| MATT | MATERIAL | SLEEVE STEEL COMP 4140 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCKING COLLAR ASSN STD SINGLE MATERIAL RESPONSE A-S 6382 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER FED SPEC SINGLE MATERIAL RESPONSE QQ-C-390 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHAFT MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHIELD FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SLEEVE ASSN STD SINGLE MATERIAL RESPONSE A-S 6382 |
| SFTT | SURFACE TREATMENT | ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM |
| STYL | STYLE DESIGNATOR | |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | LOCKING COLLAR STEEL COMP 4140 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| FEAT | SPECIAL FEATURES | 10 DEG SELF ALIGNMENT IN EITHER DIRECTION,LUBRICANT HOLES AND GROOVE IN OUTER RING |
| LBMA | LUBRICATION MATERIAL | GREASE |