NSN 3110-00-156-3545 · NIIN 001563545 · FSC 3110
NO DASHES 3110001563545
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.6250 |
| ABXV | BORE DIAMETER | MILLIMETERS NOMINAL 25.00 |
| ADGA | OVERALL OUTSIDE DIAMETER | MILLIMETERS NOMINAL 52.00 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.5910 |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 0.6000 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 1 |
| AGYK | SHIELD QUANTITY | 1 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE DOD-G-24508 |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| MATT | MATERIAL | RETAINER STEEL |
| MATT | MATERIAL | SHIELD STEEL |
| STYL | STYLE DESIGNATOR | |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 117 |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY SHIELD QUANTITY |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 010148287. An older drawing citing one of those numbers resolves here.