NSN 3110-00-190-9274 · NIIN 001909274 · FSC 3110
NO DASHES 3110001909274
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGZD | BORE SHAPE | STRAIGHT |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.7180 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 1.8510 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.5510 |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 0.9375 |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| MATT | MATERIAL | OUTER RING STEEL |
| MATT | MATERIAL | RETAINER STEEL |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| MATT | MATERIAL | SHIELD STEEL |
| STYL | STYLE DESIGNATOR | |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 1 |
| AGYK | SHIELD QUANTITY | 1 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | RADIAL |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | BALL STEEL |
| FEAT | SPECIAL FEATURES | CONE SHAPED INER RING ALSO PARKERIZED FINISH ALSO INNER RING BROACHED ALSO SHIELD FORMS BLIND END ON BROACHED SIDE OF INNER RING |
| AGYE | SURFACE FINISH | GROUND |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 008436124. An older drawing citing one of those numbers resolves here.