NSN 3110-00-198-1266 · NIIN 001981266 · FSC 3110
NO DASHES 3110001981266
In Stock
BEARING,ROLLER,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGYJ | SEAL QUANTITY | 2 |
| MATT | MATERIAL | ROD END BODY STEEL |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| MATT | MATERIAL | ROLLER STEEL |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.5310 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| FEAT | SPECIAL FEATURES | GREASE FITTING |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 1.3590 |
| AGGY | SHANK THREAD LENGTH | INCHES NOMINAL 0.7500 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.3710 |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 0.5940 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES NOMINAL 1.8750 |
| SFTT | SURFACE TREATMENT | EXPOSED SURFACES AS MOUNTED CADMIUM |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.3125 |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.5000 |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.5000 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 001591640 · 001981263. An older drawing citing one of those numbers resolves here.