NSN 3110-00-227-2598 · NIIN 002272598 · FSC 3110
NO DASHES 3110002272598
In Stock
BEARING,ROLLER,NEEDLE
Bearings, Antifriction, Unmounted
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CTFZ | STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS |
| FEAT | SPECIAL FEATURES | OIL HOLE AND GROOVE IN INNER RING |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZA | ALIGNMENT TYPE | RIGID |
| LBMA | LUBRICATION MATERIAL | GREASE |
| AGYE | SURFACE FINISH | GROUND |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.5000 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.7500 |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | OVERALL STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-7420 OR FED STD 1ST MATERIAL RESPONSE 66 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-8690 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-7493 OR FED SPEC 3RD MATERIAL RESPONSE QQ-S-624 OR FED SPEC 3RD MATERIAL RESPONSE QQ-S-633 OR FED STD 4TH MATERIAL RESPONSE 66 OR FED STD 5TH MATERIAL RESPONSE 66 |
| SFTT | SURFACE TREATMENT | ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 1.0000 |
| STYL | STYLE DESIGNATOR | |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 0.8750 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 8NCC1416YP | 3NPS1 |
| 8NCC1416YP2C | 3NPS1 |
| 8NCC1416YP | 60380 |
| 8NCC1416YP2C | 60380 |
| 8NCC1416YP2CMILG | 60380 |
| 8NCC1416YPMILG3278 | 60380 |
| 8NCC1416YPANG25 | 60380 |
| NAS506-8MILG3278 | 80205 |
| 506-8 | 80205 |
| MS24462-8 | 96906 |