NSN 3110-00-232-3075 · NIIN 002323075 · FSC 3110
NO DASHES 3110002323075
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.3750 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.3290 AND INCHES MAXIMUM 2.3590 |
| AAZF | SHANK STYLE | |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2497 AND INCHES MAXIMUM 0.2500 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.4280 AND INCHES MAXIMUM 0.4480 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES MINIMUM 1.8650 AND INCHES MAXIMUM 1.8850 |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHAFT MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| SFTT | SURFACE TREATMENT | OUTER RING CADMIUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL ASSN STD SINGLE MATERIAL RESPONSE A-S 3652 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 3666 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.5880 AND INCHES MAXIMUM 0.5930 |
| MATT | MATERIAL | SHAFT STEEL COMP 4130 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.0940 AND INCHES MAXIMUM 1.1560 |
| AGYJ | SEAL QUANTITY | 2 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.9280 AND INCHES MAXIMUM 0.9480 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | OUTER RING STEEL COMP 4130 |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
Cross-references
17 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| REP4M6FS464 | 21335 |
| RE4M5-2 | 21335 |
| REP4M6FS464-8 | 21335 |
| REP4M6FS428 | 21335 |
| REPHM6ES381 | 21335 |
| RFP4M6 | 38443 |
| MS21151-8 | 73134 |
| REP4M6FS464 | 73134 |
| REP4M6-8F | 73134 |
| REP4M6FS464-8 | 73134 |
| MS21151-8 | 81343 |
| AS21151 | 81343 |
| 3110PL0927939 | 9009H |
| MS21151-8 | 96906 |
| 10319539 | A486G |
| MS21151-8 | 0U583 |
| AS21151 | 0U583 |
Supersedes
This item replaces cancelled NIINs 001079071 · 010379282 · 012855999. An older drawing citing one of those numbers resolves here.