NSN 3110-00-232-3245 · NIIN 002323245 · FSC 3110
NO DASHES 3110002323245
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| MATT | MATERIAL | OUTER RING STEEL COMP 4130 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE TREATMENT RESPONSE QQ--416,CL 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SHAFT FED SPEC SINGLE TREATMENT RESPONSE QQ--416,CL 2 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL ASSN STD SINGLE MATERIAL RESPONSE A-S 3652 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 3666 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHAFT MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| SFTT | SURFACE TREATMENT | OUTER RING CADMIUM |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.4280 AND INCHES MAXIMUM 0.4380 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.7455 AND INCHES MAXIMUM 1.7855 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1897 AND INCHES MAXIMUM 0.1900 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.7710 AND INCHES MAXIMUM 0.7910 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.7190 AND INCHES MAXIMUM 0.7810 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.3180 AND INCHES MAXIMUM 0.3380 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.4320 AND INCHES MAXIMUM 0.4370 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES MINIMUM 1.3650 AND INCHES MAXIMUM 1.3850 |
| AGYJ | SEAL QUANTITY | 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| SFTT | SURFACE TREATMENT | SHAFT CADMIUM |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.4280 AND INCHES MAXIMUM 0.4480 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.312 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| MATT | MATERIAL | SHAFT STEEL COMP 4130 |
Cross-references
29 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7730979 | 19207 |
| REB3N2E4630ANG25 | 21335 |
| REB3N2ANG25 | 21335 |
| REB3N2MILG3278A | 21335 |
| REB3N2E4630MILG3278A | 21335 |
| REB3N2E4630FS160 | 21335 |
| REB3N2ANG25 | 21760 |
| REB3N2 | 21760 |
| REB3N2E4630FS160A | 21335 |
| REPB3N-2FS464 | 21335 |
| REB3N2 | 21335 |
| REB3N2FS160A | 21335 |
| REB3N2FS160 | 21335 |
| REB3N2MILG3278A | 21760 |
| REPB3N2 | 38443 |
| REB3N2 | 70413 |
| REP3F5-2F | 73134 |
| 25620 | 73680 |
| AN951REBN2 | 80059 |
| AS21153 | 81343 |
| MS21153-2 | 81343 |
| CVC700REB3N2 | 80378 |
| MS21153-2 | 96906 |
| MS21153B3N2 | 96906 |
| 131209 | 0AHP5 |
| AS21153 | 0U583 |
| MS21153-2 | 0U583 |
| 556-3539 | 11530 |
| 556-1427 | 11530 |
Supersedes
This item replaces cancelled NIIN 001735075. An older drawing citing one of those numbers resolves here.