NSN 3110-00-275-0140 · NIIN 002750140 · FSC 3110
NO DASHES 3110002750140
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGYK | SHIELD QUANTITY | 2 |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1890 |
| AGYE | SURFACE FINISH | GROUND |
| MATT | MATERIAL | RETAINER COPPER ALLOY |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 0.0370 |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| CTLH | OUTER RING TAPER | PER FOOT IN INCHES NOMINAL 0.0750 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 0.4380 |
| FEAT | SPECIAL FEATURES | REMOVABLE SHIELDS |
| MATT | MATERIAL | OUTER RING STEEL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1250 AND INCHES MAXIMUM 0.1253 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.1630 |
| STYL | STYLE DESIGNATOR | |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| F2DD2 | 21335 |
| F2DC1 | 21335 |
| F2DD2FS25735 | 21335 |
| F2DD2FS25735MILG3278 | 21335 |
| F2DDC1 | 21335 |
| F2DD2FS160 | 21335 |
| F2DD2MILG3278 | 21335 |
| 303-1-483 | 47496 |
| B33002-4 | 50653 |
| 33002-4 | 50653 |
| F116F2 | 72314 |
| 421634-1 | 96214 |
| ASF2HHK25 | 14927 |
Supersedes
This item replaces cancelled NIIN 012783817. An older drawing citing one of those numbers resolves here.