NSN 3110-00-275-0239 · NIIN 002750239 · FSC 3110
NO DASHES 3110002750239
In Stock
BEARING,BALL,THRUST
Bearings, Antifriction, Unmounted
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGWJ | BORE SMALLEST DIAMETER | INCHES MINIMUM 2.0625 AND INCHES MAXIMUM 2.0635 |
| AGZQ | THRUST DIRECTIONAL CAPABILITY DESIGNATION | SINGLE |
| MATT | MATERIAL | BAND STEEL |
| MATT | MATERIAL | RETAINER COPPER ALLOY OR STEEL |
| MATT | MATERIAL | WASHER STEEL |
| AGYE | SURFACE FINISH | GROUND |
| AGZA | ALIGNMENT TYPE | RIGID |
| MATT | MATERIAL | BALL STEEL |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 3.5000 |
| FEAT | SPECIAL FEATURES | BRONZE OR STEEL FERRULE IN ID OF LARGE WASHER,LARGE WASHER UNDERCUT TO RETAIN FERRULE,LUBRICATING NOTCH CUT IN ID OF SMALL WASHER,WASHERS OVERLAP,BANDED OD |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.7970 |
Cross-references
25 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1505967M | 22081 |
| 83788M1 | 22081 |
| 456859 | 24617 |
| 451898 | 24617 |
| 456858 | 24617 |
| 1273 | 29510 |
| HA1341 | 29510 |
| 69659 | 30076 |
| 230303 | 30076 |
| 1600824 | 65282 |
| 1709805 | 65282 |
| 1709805 | 62265 |
| 1600824 | 62265 |
| 4225631 | 66821 |
| 5040G5022 | 66821 |
| 223439 | 77237 |
| 1828S71 | 78500 |
| 5040G5022 | 83299 |
| 4709805 | 89926 |
| 36SH139 | 89619 |
| 223439 | 89881 |
| 106346 | 04627 |
| 230303 | 04627 |
| 2065-18 | 05415 |
| 223439 | 12603 |
Supersedes
This item replaces cancelled NIINs 008490473 · 008544871 · 008433600 · 009328640. An older drawing citing one of those numbers resolves here.