NSN 3110-00-345-6077 · NIIN 003456077 · FSC 3110
NO DASHES 3110003456077
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0035 AND INCHES MAXIMUM RADIAL 0.0041 |
| MATT | MATERIAL | RETAINER STEEL COMP 4340 |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| CTHY | CONTACT ANGLE | DEGREES NOMINAL 27.0 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 2.5589 AND INCHES MAXIMUM 2.5591 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 3.9367 AND INCHES MAXIMUM 3.9370 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.7850 |
| AGZD | BORE SHAPE | STRAIGHT |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| PRMT | PRECIOUS MATERIAL | SILVER |
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MFR REF 3RD MATERIAL RESPONSE WA 725,97497 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MFR REF 1ST MATERIAL RESPONSE WA 725,97497 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MFR REF 2ND MATERIAL RESPONSE WA 725,97497 |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYE | SURFACE FINISH | GROUND |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.8021 AND INCHES MAXIMUM 0.8071 |
| FEAT | SPECIAL FEATURES | SILVER PLATE CAGE PER AMS 2412 0.001-0.002 THK. CONTACT POINTS PERMISSABLE EXCEPT ON LAND RIDING SURF AND BALL POCKETS. BAKE AT 475-500F TO CHECK FOR BOND |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 013158661. An older drawing citing one of those numbers resolves here.