NSN 3110-00-405-4639 · NIIN 004054639 · FSC 3110
NO DASHES 3110004054639
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0005 AND INCHES MAXIMUM RADIAL 0.0008 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER COPPER ALLOY 864 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER ASSN STD SINGLE MATERIAL RESPONSE AST- B147,81346 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-I-6868 AND SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-I-6866 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.3780 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 2.1654 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.3937 |
| CTHY | CONTACT ANGLE | DEGREES NOMINAL 12.0 |
| FEAT | SPECIAL FEATURES | STABILIZED FOR OPERATION AT M65 TO P275 DEG F,C SCALE 58 MIN ROCKWELL HARDNESS BALLS,INNER AND OUTER RINGS,SURFACE FINISH ID INNER RING AND OD OUTER RING 16 MICROINCHES AA,RACEWAYS 8 MICROINCHES AA,INNER RING OD 20 MICROINCHES AA,ID OUTER RING 125 MICROINCHES AA,RING FACES 32 MICROINCHES AA,RETAINER 63 MICROINCHES AA |
| MATT | MATERIAL | BALL STEEL COMP E51100 |
| AGZD | BORE SHAPE | STRAIGHT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2M9307WIMBRE9076 | 21335 |
| 1907R4 | 38443 |
| 59636 | 38443 |
| 59636 | 93835 |
Supersedes
This item replaces cancelled NIIN 014575991. An older drawing citing one of those numbers resolves here.