NSN 3110-00-409-9849 · NIIN 004099849 · FSC 3110
NO DASHES 3110004099849
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | INNER RING RACE STEEL COMP 4130 OR STEEL COMP 8620 OR STEEL COMP E52100 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.1800 AND INCHES MAXIMUM 0.1900 |
| AAZF | SHANK STYLE | |
| AAJD | THREAD CLASS | 3A |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| FEAT | SPECIAL FEATURES | DOUBLE ROW |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING RACE MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6758 AND MIL SPEC 2ND MATERIAL RESPONSE -IL-S-8690 AND MIL SPEC 3RD MATERIAL RESPONSE -IL-S-7420 |
| SFTT | SURFACE TREATMENT | ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ALL EXTERNAL/EXPOSED METAL SURFACES FED SPEC SINGLE TREATMENT RESPONSE QQ--416 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES NOMINAL 1.3750 |
| AGYJ | SEAL QUANTITY | 2 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.7655 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1897 AND INCHES MAXIMUM 0.1900 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 0.7810 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.7190 AND INCHES MAXIMUM 0.7810 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.3280 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.4320 AND INCHES MAXIMUM 0.4370 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RE3MR3FS160 | 21335 |
| RE3MR3FS180 | 21335 |
| REP3MR3FS428 | 21335 |
| RE3MR3E4630 | 21335 |
| RF3MR3MILG3278A | 21335 |
| 221009-1 | 33068 |
| AN946RE3MR3MILG3278A | 88044 |
| MS21151-3MR3 | 96906 |
| MS21151-3MR3G | 96906 |
| AN946RE3MR3MILG3278A | 03489 |
Supersedes
This item replaces cancelled NIINs 005404672 · 008743547. An older drawing citing one of those numbers resolves here.