NSN 3110-00-514-4828 · NIIN 005144828 · FSC 3110
NO DASHES 3110005144828
In Stock
BEARING,ROLLER,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.4950 AND INCHES MAXIMUM 0.5000 |
| AGVT | OUTER RING WIDTH | INCHES MAXIMUM 0.3750 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.9800 AND INCHES MAXIMUM 1.0200 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MAXIMUM 1.0800 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.3700 AND INCHES MAXIMUM 2.3900 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | INCHES MAXIMUM 0.3750 |
| AAZF | SHANK STYLE | |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| FEAT | SPECIAL FEATURES | INTERNAL CLEARANCE 0.0002 IN.MIN 0.0010 IN.MAX |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | ROLLER STEEL COMP E52100 |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | SUPPORTING SLEEVE STEEL COMP 4620 OR STEEL COMP 4130 OR STEEL COMP 8620 OR STEEL COMP E52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED STD SINGLE MATERIAL RESPONSE 66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROLLER FED STD SINGLE MATERIAL RESPONSE 66 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES MINIMUM 1.8300 AND INCHES MAXIMUM 1.8500 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| SFTT | SURFACE TREATMENT | EXPOSED SURFACES AS MOUNTED CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | EXPOSED SURFACES AS MOUNTED FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SUPPORTING SLEEVE MIL SPEC 1ST MATERIAL RESPONSE -IL-S-7493 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6758 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-8690 OR FED STD 4TH MATERIAL RESPONSE 66 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS21221 | 81343 |
| MS21221-4G | 81343 |
| MS21221-46 | 81343 |
| MS21221-4G | 96906 |
| AS21221 | 0U583 |
| MS21221-4G | 0U583 |
Supersedes
This item replaces cancelled NIIN 011124431. An older drawing citing one of those numbers resolves here.