NSN 3110-00-515-1489 · NIIN 005151489 · FSC 3110
NO DASHES 3110005151489
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Application: ACFT ENG TF-39
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 9.3500 AND INCHES MAXIMUM 9.3505 |
| AGAV | END ITEM IDENTIFICATION | ACFT ENG TF-39 |
| AGYE | SURFACE FINISH | GROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.3973 AND INCHES MAXIMUM 1.4173 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 5.9051 AND INCHES MAXIMUM 5.9055 |
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MFR REF 2ND MATERIAL RESPONSE C50TF56 CL-A,07482 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MFR REF 3RD MATERIAL RESPONSE C50TF56 CL-A,07482 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MFR REF 1ST MATERIAL RESPONSE C50TF56 CL-A,07482 |
| MATT | MATERIAL | RETAINER STEEL COMP 4340 |
| MATT | MATERIAL | OUTER RING STEEL |
| FEAT | SPECIAL FEATURES | OUTER RING IS FLANGED AT CENTER JUNCTION OF TWO BEARINGS 0.5800 IN. MIN 0.5850 IN. MAX WIDE,1.8505 IN. MIN 1.8700 IN. MAX LONG |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | INNER RING STEEL |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 71830D104F1830RD104F | 38443 |
| 9634M10P06 | 38443 |
| 461601VAA | 52676 |
| 9634M10P08 | 78118 |
| SBB5HADH1830-4 | 78118 |
| 3110PL0899691 | 9009H |
| 9634M10P06 | 07482 |
| 9634M10P08 | 07482 |
| 9634M10P07 | 07482 |