NSN 3110-00-516-2415 · NIIN 005162415 · FSC 3110
NO DASHES 3110005162415
In Stock
BEARING,ROLLER,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES NOMINAL 3.0800 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.9950 AND INCHES MAXIMUM 1.0000 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 1.1200 AND INCHES MAXIMUM 1.1250 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.7493 AND INCHES MAXIMUM 0.7500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 2.8800 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.1000 AND INCHES MAXIMUM 1.1600 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.8750 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.5200 |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| MATT | MATERIAL | RETAINER STEEL |
| MATT | MATERIAL | ROLLER STEEL |
| MATT | MATERIAL | SHAFT STEEL COMP E4340 |
| SFTT | SURFACE TREATMENT | EXPOSED SURFACES AS MOUNTED CADMIUM |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MATT | MATERIAL | ALIGNMENT RING STEEL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.875 |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |