NSN 3110-00-554-1339 · NIIN 005541339 · FSC 3110
NO DASHES 3110005541339
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.8120 AND INCHES MAXIMUM 0.8125 |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| AGYE | SURFACE FINISH | GROUND |
| AGZD | BORE SHAPE | STRAIGHT |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.9841 AND INCHES MAXIMUM 0.9843 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 2.0470 AND INCHES MAXIMUM 2.0472 |
| STYL | STYLE DESIGNATOR | |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| FEAT | SPECIAL FEATURES | RINGS AND BALLS HEAT STABILIZED 250 DEG F TO 350 DEG F ALSO W/O GREASE PLUG ALSO SELECTED,CLASSIFIED AND TESTED BY TH ASSEMBLY MFR AT HIS PLANT |
| AGYW | BEARING SEAL TYPE | CONTACT |
| MATT | MATERIAL | OUTER RING STEEL |
| MATT | MATERIAL | RETAINER STEEL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0007 AND INCHES MAXIMUM RADIAL 0.0011 |
| AGZC | LOAD DIRECTION | RADIAL |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| PMW205PPC3FS57658H | 21335 |
| 890112-27 | 64547 |
| 890112-27 | 83298 |
| 850789 | F1688 |
| 8125-075 | F6103 |
| 8125-075 | F1688 |
| PMW205PP | F6103 |
| 850789 | F6103 |
| PMW205PP | F1688 |
| MAF0001000009 | A00AM |
Supersedes
This item replaces cancelled NIINs 002786813 · 002770977. An older drawing citing one of those numbers resolves here.