NSN 3110-00-625-9295 · NIIN 006259295 · FSC 3110
NO DASHES 3110006259295
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ALL EXTERNAL/EXPOSED METAL SURFACES FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| AHAW | SELF-ALIGNMENT LOCATION | EXTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| FEAT | SPECIAL FEATURES | FILLED WITH 80 PCT OF SPECIFIED LUBRICANT,NAS513 KEYWAY SLOT |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.3180 AND INCHES MAXIMUM 0.3380 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.4320 AND INCHES MAXIMUM 0.4370 |
| AAZE | SHANK DIAMETER | INCHES MAXIMUM 0.2500 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1897 AND INCHES MAXIMUM 0.1900 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.7710 AND INCHES MAXIMUM 0.7910 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.9690 AND INCHES MAXIMUM 1.0310 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL ASSN STD SINGLE MATERIAL RESPONSE A-S 3652 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.3540 AND INCHES MAXIMUM 2.3640 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES MINIMUM 1.5530 AND INCHES MAXIMUM 1.5730 |
| AAZF | SHANK STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| STYL | STYLE DESIGNATOR | |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4130 |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE |
| LBMA | LUBRICATION MATERIAL | GREASE |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| REP3MS4-6FS428 | 21335 |
| REP3MS4-6FS464 | 21335 |
| REP3MK4-7F | 73134 |
| REP3MS4-6FS464 | 73134 |
| AS21151 | 81343 |
| MS21151-7C | 81343 |
| MS21151-7C | 96906 |
| MS21151-7C | 0U583 |
| AS21151 | 0U583 |