NSN 3110-00-863-1195 · NIIN 008631195 · FSC 3110
NO DASHES 3110008631195
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). E1004-91547 AND SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 6903-91547 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE A-S 6441 81343 |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| MATT | MATERIAL | RETAINER COPPER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6440 TO 7440 81343 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE MATERIAL RESPONSE A-S 6441 81343 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.3543 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.9843 |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM AXIAL 0.0040 AND INCHES MAXIMUM AXIAL 0.0060 AND INCHES MINIMUM RADIAL 0.0003 AND INCHES MAXIMUM RADIAL 0.0009 |
| STYL | STYLE DESIGNATOR | |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | RADIAL |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 1.6535 |
| MATT | MATERIAL | BALL STEEL |
| CBBL | FEATURES PROVIDED | ALIGNING RING |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| FEAT | SPECIAL FEATURES | FACES OF INNER RING SQ W/BORE WITHIN 0.0004 IN.,FACES OF OUTER RING SQW/OD WITHIN 0.0004 IN.,PARALLELISM OFOUTER AND INNER RING SIDES 0.0004 IN.,OD CONCENTRIC W/BORE WITHIN 0.002 TO 0.005 IN.,HEAT STABILIZED FOR OPERATION AT M65 DEG F TO P350 DEG F,BORE SURFACE 16 TO 20 UIN AA,OD SURFACE 15 TO 16 UIN AA,INNER AND OUTER RING RACEWAY SURFACES 6 TO 8 UIN AA,RETAINER POCKET SURFACE 30 TO 63 UIN AA,LIPS OF INNER RING SURFACE 10 TO 20 UIN AA,RING AND BALL ROCKWELL HARDEN C58.0 TO C62.0 |
| AGZD | BORE SHAPE | STRAIGHT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER MFR REF SINGLE MATERIAL RESPONSE -3905,91547 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RM9305KMBRE8682 | 21335 |
| D3-50141 | 38443 |
| 2-300-031-01 | 38443 |
| 1905S305 | 38443 |
| 2-300-031-02 | 78118 |
| HKB005-158 | 78118 |
| 2-300-031 | 99193 |
| 2-300-031-03 | 99193 |
| 2-300-031-01 | 99193 |
| 2-300-031-02 | 99193 |
| 2-300-031-01L | 99193 |