NSN 3110-00-863-1206 · NIIN 008631206 · FSC 3110
NO DASHES 3110008631206
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OUTER RING STEEL |
| ABMK | OVERALL WIDTH | MILLIMETERS NOMINAL 46.00 |
| FEAT | SPECIAL FEATURES | IN ACCORDANCE WITH THE PREMIUM AIRCRAFT QUALITY RQMT OF LYCOMING TURBINE ENGINEERING SPEC E 100,RETAINER SILVER-PLATED 0.0005 TO 0.0015 IN. THK PER AMS 2412,STABILIZED FOR OPERATION AT MINUS 65 DEG TO PLUS 600 DEG,THREE GROOVES 0.0400 TO 0.0500 IN. WIDE BY 0.0150 IN. TO 0.0200 IN. DEEP EQUALLY SPACED ON INNER FACES OF OUTER RINGS,THRUST MARKINGS V ETCHED ON OD AND ID SURFACES OF OUTER AND INNER RINGS,BORE AND OD SURFACES 16 MICRO-INCHES,INNER AND OUTER RING RACEWAY SURFACES 8 MICRO-INCHES,RETAINER POCKET SURFACES 30. MICRO-INCHES,BALL 2 MICRO-INCHES SPLIT INNER RING,4 POINT BALL CONTACT |
| MATT | MATERIAL | INNER RING STEEL |
| ADGA | OVERALL OUTSIDE DIAMETER | MILLIMETERS NOMINAL 120.00 |
| AGZC | LOAD DIRECTION | ANGULAR |
| MATT | MATERIAL | BALL STEEL |
| AGYE | SURFACE FINISH | GROUND |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0033 AND INCHES MAXIMUM RADIAL 0.0043 |
| ABXV | BORE DIAMETER | MILLIMETERS NOMINAL 65.00 |
| MATT | MATERIAL | RETAINER COPPER ALLOY |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AAMM213-3SMBRDTE7103 | 21335 |
| HTDZ213-2 | 78118 |
| 2-300-011-02 | 99193 |
| 2-300-011 | 99193 |
| 2-300-011-04 | 99193 |