NSN 3110-00-915-3278 · NIIN 009153278 · FSC 3110
NO DASHES 3110009153278
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY ASSN STD 1ST MATERIAL RESPONSE AISI OR MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6758 OR ASSN STD 2ND MATERIAL RESPONSE AISI OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-8690 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL ASSN STD SINGLE MATERIAL RESPONSE A-S 3625 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 3666 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE MATERIAL RESPONSE AISI OR MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0000 AND INCHES MAXIMUM RADIAL 0.0004 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR ROD END BALL BEARING |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER STEEL COMP 301 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER ASSN STD SINGLE MATERIAL RESPONSE AISI |
| AGGY | SHANK THREAD LENGTH | INCHES NOMINAL 1.1250 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.4380 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 2 |
| STYL | STYLE DESIGNATOR | |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES NOMINAL 1.8750 |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.2500 |
| AAZF | SHANK STYLE | |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4130 OR STEEL COMP 8620 |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL ASSN STD SINGLE MATERIAL RESPONSE AISI OR MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 0.5930 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | LEFT-HAND |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.3750 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.3440 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| REP4ML6 | 21335 |
| REP4ML6FS210 | 21335 |
| REP4ML6-8G | 73134 |
| AS6039 | 81343 |
| AN946RE4ML6 | 88044 |
| MS21151-9G | 96906 |
| REP4ML6 | F0563 |
| AS6039 | 0U583 |
Supersedes
This item replaces cancelled NIIN 001981249. An older drawing citing one of those numbers resolves here.