NSN 3110-00-937-0276 · NIIN 009370276 · FSC 3110
NO DASHES 3110009370276
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGZD | BORE SHAPE | STRAIGHT |
| MATT | MATERIAL | RETAINER STEEL |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0008 AND INCHES MAXIMUM RADIAL 0.0013 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | RADIAL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-25760 |
| MATT | MATERIAL | BALL STEEL |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OUTER RING STEEL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.6249 AND INCHES MAXIMUM 0.6299 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.1809 AND INCHES MAXIMUM 1.1811 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 2.4408 AND INCHES MAXIMUM 2.4409 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| CBBL | FEATURES PROVIDED | ALIGNING RING |
| MATT | MATERIAL | INNER RING STEEL |
| FEAT | SPECIAL FEATURES | STABILIZED FOR OPERATION AT 350 DEG F,PACKED 1/5 TO 2/5 FULL W/LUBRICANT,LETTER D ELECTROETCHED ON BEARING W/OD 2.4408 TO 2.4409 IN.,LETTER D MARKED ON FACE OF OUTER RING |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M206PPC3-111438D | 21335 |
| M206PPFS59562 | 21335 |
| 07-111438D | 31435 |
| 03-6006-06D | 31435 |
| 07-111438 | 31435 |
| 206SZZ18-111438D | 38443 |
| XJ102VVSU34-111438D | 43991 |
| Z99506J111438D | 43334 |
Supersedes
This item replaces cancelled NIIN 003161943. An older drawing citing one of those numbers resolves here.