NSN 3110-00-937-1182 · NIIN 009371182 · FSC 3110
NO DASHES 3110009371182
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGYE | SURFACE FINISH | GROUND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MFR REF SINGLE MATERIAL RESPONSE -4001,91547 |
| ABXV | BORE DIAMETER | MILLIMETERS NOMINAL 55.00 |
| AGZD | BORE SHAPE | STRAIGHT |
| STYL | STYLE DESIGNATOR | |
| ADGA | OVERALL OUTSIDE DIAMETER | MILLIMETERS NOMINAL 100.00 |
| PRMT | PRECIOUS MATERIAL | SILVER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MFR REF SINGLE MATERIAL RESPONSE -4001,91547 |
| ABMK | OVERALL WIDTH | MILLIMETERS NOMINAL 21.00 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER MFR REF SINGLE MATERIAL RESPONSE -3900,91547 |
| MATT | MATERIAL | RETAINER COPPER ALLOY |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 91547-E1004 OR SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 91547-6903 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MFR REF SINGLE MATERIAL RESPONSE -4001,91547 |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| MATT | MATERIAL | BALL STEEL |
| AKVV | INTERNAL CLEARANCE | INCHES NOMINAL AXIAL 0.0130 AND INCHES NOMINAL RADIAL 0.0024 |
| CBBL | FEATURES PROVIDED | ALIGNING RING |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| CTHY | CONTACT ANGLE | DEGREES MAXIMUM 22.0 |
| FEAT | SPECIAL FEATURES | HEAT STABILIZED FOR OPERATION AT M65 TO P350 DEG F BALL,INNER AND OUTERRINGS ROCKWELL HARDENED 58.0 TO 62.0 CSCALE INNER AND OUTER RING RACE WAYS 8 UIN AA,BORE AND OD SURFACE INNER RING LIPS 16 UIN AA,RETAINER 32 UIN AAO/A |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER RETAINER |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MM211VM6MBRE9266 | 21335 |
| 460920 | 38443 |
| 460920 | 52676 |
| 1-300-329-01 | 78U39 |
| 1-300-329-02 | 78U39 |
| 1-300-329-01 | 99193 |
| 1-300-329-02 | 99193 |
| 1-300-329 | 99193 |
Supersedes
This item replaces cancelled NIIN 004108152. An older drawing citing one of those numbers resolves here.