NSN 3110-00-946-8276 · NIIN 009468276 · FSC 3110
NO DASHES 3110009468276
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGFF | FLANGE WIDTH | INCHES NOMINAL 0.0420 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| FEAT | SPECIAL FEATURES | 0.5909 IN. TO 0.5923 IN. RETAINER,TURN RATIO; TWO HOLES DRILLED THROUGH FACE OF RETAINER; MINIMUM CONTACT ANGLE 28.0 DEG; AVERAGE RUNNING TORQUE 0.40 GM-CM MAX; BREAKOUT ON OD OF INNER RING |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| MATT | MATERIAL | RETAINER PLASTIC PHENOLIC AND COTTON |
| AGZC | LOAD DIRECTION | RADIAL |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.1950 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.2500 |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 0.6900 |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 0.2500 |
| AGVV | OUTER RING OUTSIDE DIAMETER | INCHES NOMINAL 0.6250 |
| AGYE | SURFACE FINISH | GROUND |
| AGZD | BORE SHAPE | STRAIGHT |
| CTHQ | BEARING PRELOAD RATING | POUNDS NOMINAL 3.0 |
| CTHY | CONTACT ANGLE | DEGREES MAXIMUM 32.0 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MMF21W0VM7-2CRVE | 21335 |
| D140 | 40920 |
| D354 | 40920 |
| Z560X21V12-0-12DD | 70854 |
| Z564X21 | 70854 |
| Z560X21-972091-0001 | 70854 |
| Z560X21V120-12DD | 70854 |
| 972091-1 | 06481 |