NSN 3110-00-991-0949 · NIIN 009910949 · FSC 3110
NO DASHES 3110009910949
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZC | LOAD DIRECTION | RADIAL |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0008 AND INCHES MAXIMUM RADIAL 0.0012 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-18709 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| AGYW | BEARING SEAL TYPE | LIPS TURNED OUTWARDLY |
| AGZH | INTERNAL FIT-UP DESIGNATION | TIGHT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 2.4980 AND INCHES MAXIMUM 2.5000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED STD SINGLE MATERIAL RESPONSE 66 |
| MATT | MATERIAL | RETAINER STEEL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 120 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 2.7557 AND INCHES MAXIMUM 2.7559 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 5.9053 AND INCHES MAXIMUM 5.9055 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED STD SINGLE MATERIAL RESPONSE 66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED STD SINGLE MATERIAL RESPONSE 66 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 314SZZCNT3 | 38443 |
| S3614E100 | 53035 |
| 999999K104 | 80064 |
| M17931-C020 | 81349 |
| MILB17931 | 81349 |
| D72047PC91 | 95402 |
| 2883-21 | 08219 |