NSN 3110-01-017-1607 · NIIN 010171607 · FSC 3110
NO DASHES 3110010171607
In Stock
BEARING,BALL,AIRFRAME
Bearings, Antifriction, Unmounted
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.7495 AND INCHES MAXIMUM 0.7500 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.7450 AND INCHES MAXIMUM 0.7500 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.8700 AND INCHES MAXIMUM 0.8750 |
| AGYF | RETAINER FABRICATION METHOD | STAMPED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | RADIAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MATT | MATERIAL | SEAL PLASTIC TETRAFLUOROETHYLENE |
| MATT | MATERIAL | RETAINER STEEL |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| SFTT | SURFACE TREATMENT | ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM |
| STYL | STYLE DESIGNATOR |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GDW4KFS428 | 21335 |
| BACB10CG4A | 21760 |
| GDW4KTT | 43991 |
| GDW4KFS428 | 3NPS1 |
| BACB10CG4A | 3NPS1 |
| LLDW-4-K-1 | 38443 |
| 600-7558-002 | 46555 |
| BACB10CG4A | 81205 |
| BACB10A120 | 81205 |
Supersedes
This item replaces cancelled NIIN 001586295. An older drawing citing one of those numbers resolves here.