NSN 3110-01-026-3295 · NIIN 010263295 · FSC 3110
NO DASHES 3110010263295
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.6250 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.3440 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.2500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 0.9380 |
| AGGY | SHANK THREAD LENGTH | INCHES NOMINAL 1.1250 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.4380 |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 0.5930 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES NOMINAL 1.8750 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.4380 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.438 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| FEAT | SPECIAL FEATURES | LOCKING SLOT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | INNER RACE STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER STEEL CORROSION RESISTING |
| MATT | MATERIAL | SHAFT STEEL COMP 4130 |
| MATT | MATERIAL | OUTER RACE STEEL COMP 4130 |
| MATT | MATERIAL | ROLLER PLASTIC POLYTETRAFLUOROETHYLENE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RACE MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHAFT MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RACE MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS21153 | 81343 |
| MS21153-8C | 96906 |
| AS21153 | 0U583 |