NSN 3110-01-049-4147 · NIIN 010494147 · FSC 3110
NO DASHES 3110010494147
In Stock
BEARING,ROLLER,NEEDLE
Bearings, Antifriction, Unmounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.3745 AND INCHES MAXIMUM 0.3750 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.9990 AND INCHES MAXIMUM 1.0000 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.9350 AND INCHES MAXIMUM 0.9400 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.9900 AND INCHES MAXIMUM 1.0000 |
| AGYE | SURFACE FINISH | GROUND |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | RIGID |
| FEAT | SPECIAL FEATURES | 80 PCT FULL OF SPECIFIED LUBRICANT,4 LUBE HOLES 90 DEGREES APART AND GROOVE IN INNER RINGS |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| MATT | MATERIAL | ROLLER STEEL COMP E52100 |
| MATT | MATERIAL | THRUST RETAINER PLASTIC POLYAMIDE NYLON |
| MATT | MATERIAL | SEAL PLASTIC ACETAL |
| MATT | MATERIAL | WASHER STEEL COMP E52100 OR STEEL COMP 1074 |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE MATERIAL RESPONSE A-S6440 OR ASSN STD SINGLE MATERIAL RESPONSE A-S6441 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE A-S6440 OR ASSN STD SINGLE MATERIAL RESPONSE A-S6441 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | WASHER FED SPEC SINGLE MATERIAL RESPONSE -S6440 OR ASSN STD 2ND MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROLLER ASSN STD SINGLE MATERIAL RESPONSE A-S6440 OR ASSN STD SINGLE MATERIAL RESPONSE A-S6441 |
| SFTT | SURFACE TREATMENT | OUTER RING CHROMIUM |
| SFTT | SURFACE TREATMENT | WASHER CADMIUM |
| SFTT | SURFACE TREATMENT | INNER RING CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | WASHER FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER RING FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST4M200-6 | 35962 |
| ST4M200-6 | 36164 |
| AE52431 | 3NPS1 |
| ST4M200-6 | 3NPS1 |
| AE52431 | 60380 |
| ST4M200-6 | 60380 |
| 74A410541-1001 | 6K4C8 |
| 74A410541-1001 | 76301 |
| ST4M200-6 | 76301 |
| ST4M200-6 | 9K006 |
| 10107444 | A486G |
| ST4M200-6 | S5495 |
| ST4M200-6 | 07484 |
| 74A410541-1001 | 13002 |