NSN 3110-01-053-9866 · NIIN 010539866 · FSC 3110
NO DASHES 3110010539866
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.6230 AND INCHES MAXIMUM 0.6250 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.0940 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2497 AND INCHES MAXIMUM 0.2500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.9280 AND INCHES MAXIMUM 0.9480 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.4280 AND INCHES MAXIMUM 0.4480 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.5880 AND INCHES MAXIMUM 0.5930 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES MINIMUM 1.6150 AND INCHES MAXIMUM 1.6350 |
| AGXJ | SHANK BORE DIAMETER | INCHES NOMINAL 0.5150 |
| AGXK | SHANK BORE DEPTH | INCHES MINIMUM 0.8440 AND INCHES MAXIMUM 0.9060 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| FEAT | SPECIAL FEATURES | 80 PCT MIN FULL SPECIFIED LUBRICANT,SHANK FULL OF PUTTY 3119 FSCM 04622 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4620 OR STEEL COMP 4720 OR STEEL COMP 8620 OR STEEL COMP 4130 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER STEEL COMP 302 OR STEEL COMP 301 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER ASSN STD 1ST MATERIAL RESPONSE A-S5515 OR MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5059 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5059 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL ASSN STD SINGLE MATERIAL RESPONSE A-S 3652 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC 1ST MATERIAL RESPONSE QQ-S-624 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-624 OR FED SPEC 3RD MATERIAL RESPONSE QQ-B-624 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6758 |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STYL | STYLE DESIGNATOR |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| REP4H8FS436 | 21335 |
| REP4H8FS436S8 | 21335 |
| BACB10AE10A | 21335 |
| HHRE-4-H-8-1 | 38443 |
| BACB10AE10A | 50294 |
| ABR4H-104 | 50294 |
| BACB10AE10A | 73134 |
| BACB10AE10A | 77896 |
| BACB10AE10A | 81205 |
| 60-2293 | 81205 |
| BACB10AE10A | 92563 |
| BACB10AE10A | 15860 |
Supersedes
This item replaces cancelled NIIN 000814467. An older drawing citing one of those numbers resolves here.