NSN 3110-01-054-1504 · NIIN 010541504 · FSC 3110
NO DASHES 3110010541504
In Stock
BEARING,ROLLER,NEEDLE
Bearings, Antifriction, Unmounted
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3125 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.5650 AND INCHES MAXIMUM 0.5700 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.6150 AND INCHES MAXIMUM 0.6250 |
| AGWG | CROWN RADIUS | INCHES MINIMUM 12.5000 AND INCHES MAXIMUM 14.5000 |
| AGYE | SURFACE FINISH | GROUND |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | RIGID |
| FEAT | SPECIAL FEATURES | PACK 8O PCT FULL WITH SPECIFIED LUBRICANT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | ROLLER STEEL COMP E52100 |
| MATT | MATERIAL | WASHER STEEL COMP 1074 OR STEEL COMP E52100 |
| MATT | MATERIAL | SEAL PLASTIC ACETAL |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROLLER ASSN STD SINGLE MATERIAL RESPONSE A-S6440 OR ASSN STD SINGLE MATERIAL RESPONSE A-S6441 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE MATERIAL RESPONSE A-S6440 OR ASSN STD SINGLE MATERIAL RESPONSE A-S6441 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE A-S6440 OR ASSN STD SINGLE MATERIAL RESPONSE A-S6441 |
| SFTT | SURFACE TREATMENT | EXPOSED SURFACES AS MOUNTED CADMIUM |
| SFTT | SURFACE TREATMENT | OUTER RING OUTSIDE DIAMETER CHROMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING OUTSIDE DIAMETER FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | EXPOSED SURFACES AS MOUNTED FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STYL | STYLE DESIGNATOR |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ATF8 | 21335 |
| BACB10ET08 | 21335 |
| ATF8 | 3NPS1 |
| BACB10ET08 | 3NPS1 |
| ATF8 | 60380 |
| AC47219 | 60380 |
| BACB10ET08 | 81205 |
| 8AFC1021 | 92563 |
| BACB10ET08 | 92563 |
| BACB10ET08 | 07484 |