NSN 3110-01-062-1078 · NIIN 010621078 · FSC 3110
NO DASHES 3110010621078
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.3750 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.5160 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1897 AND INCHES MAXIMUM 0.1900 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 0.9690 |
| AGGY | SHANK THREAD LENGTH | INCHES NOMINAL 1.3120 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.4070 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.4950 AND INCHES MAXIMUM 0.5000 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES NOMINAL 2.0310 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| FEAT | SPECIAL FEATURES | FILL 80 PCT FULL W/SPECIFIED LUBRICANT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER STEEL COMP 302 OR STEEL COMP 301 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4720 OR STEEL COMP 8620 OR STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED STD SINGLE MATERIAL RESPONSE 66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY ASSN STD 1ST MATERIAL RESPONSE AISI4720 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-624 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6758 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER ASSN STD 1ST MATERIAL RESPONSE A-S5515 OR MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5059 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5059 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED STD SINGLE MATERIAL RESPONSE 66 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | EXPOSED SURFACES AS MOUNTED CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | EXPOSED SURFACES AS MOUNTED FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
18 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| REP3M6AFS428 | 21335 |
| BACB10AD | 21335 |
| BACB10AD4 | 21335 |
| REPM6AFS428 | 21335 |
| HHRE-3-M-6-A-1 | 38443 |
| BACB10AD4 | 50294 |
| ABR3M-3G | 50294 |
| BACB10AD | 73134 |
| REP3M6AFS428 | 73134 |
| REP3M6-3J | 73134 |
| BACB10AD4 | 73134 |
| BACB10AD | 77896 |
| DBM3-6B1-501 | 77896 |
| BACB10AD4 | 77896 |
| BACB10AD4 | 81205 |
| BACB10AD4 | 15860 |
| BACB10AD | 15860 |
| ABR3M-3B | 15860 |
Supersedes
This item replaces cancelled NIIN 007202578. An older drawing citing one of those numbers resolves here.