NSN 3110-01-089-4340 · NIIN 010894340 · FSC 3110
NO DASHES 3110010894340
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.1552 AND INCHES MAXIMUM 0.1562 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1873 AND INCHES MAXIMUM 0.1875 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.4998 AND INCHES MAXIMUM 0.5000 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0005 AND INCHES MAXIMUM RADIAL 0.0008 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| FEAT | SPECIAL FEATURES | STABILIZED FOR OPERATION FROM M65 DEG F TO P250 DEG F,C56.0 TO C64.0 ROCKWELL HARDNESS RINGS AND BALLS |
| MATT | MATERIAL | OVERALL STEEL COMP 440A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 73030-763627-1 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| K719 | 40920 |
| SR3MBR7P58L02 | 40920 |
| SR3MBR7 | 40920 |
| SSMDR-3FA7P58L01K8 | 50294 |
| S1106B1K58 | 50294 |
| 763627-1 | 73030 |
| 763627-2 | 73030 |
| 763627 | 73030 |
| S1106B1K58 | 83086 |
| 763627-2 | 99207 |