NSN 3110-01-094-4412 · NIIN 010944412 · FSC 3110
NO DASHES 3110010944412
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Application: AH-1 SERIES HELICOPTERS
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | MILLIMETERS NOMINAL 25.0 |
| ABXV | BORE DIAMETER | MILLIMETERS NOMINAL 110.0 |
| ADGA | OVERALL OUTSIDE DIAMETER | MILLIMETERS NOMINAL 170.0 |
| AGAV | END ITEM IDENTIFICATION | AH-1 SERIES HELICOPTERS |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STANDARD TAPER |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0160 AND INCHES MAXIMUM RADIAL 0.0123 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| CTHY | CONTACT ANGLE | DEGREES MINIMUM 25.0 |
| LBMA | LUBRICATION MATERIAL | OIL LUBRICATING OR GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-L-7808 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-G-25537 |
| MATT | MATERIAL | OVERALL STEEL COMP M50 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6490 |
| STYL | STYLE DESIGNATOR |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 212-040-136-1 | 21335 |
| AMM9122-44-101 | 21335 |
| AAM9122-44-101 | 21335 |
| 5HTH 122-25 | 21335 |
| 212-040-136-1 | 78118 |
| 212-040-136-001 | 97499 |
| 212-040-136-1 | 97499 |