NSN 3110-01-095-7682 · NIIN 010957682 · FSC 3110
NO DASHES 3110010957682
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.1950 AND INCHES MAXIMUM 0.1960 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2498 AND INCHES MAXIMUM 0.2500 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 0.6890 AND INCHES MAXIMUM 0.6900 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0020 AND INCHES MAXIMUM 0.0420 |
| AGVV | OUTER RING OUTSIDE DIAMETER | INCHES MINIMUM 0.6248 AND INCHES MAXIMUM 0.6250 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYK | SHIELD QUANTITY | 2 |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0001 AND INCHES MAXIMUM RADIAL 0.0008 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| FEAT | SPECIAL FEATURES | STABILIZED FOR OPERATION AT 500 DEG F,PACKED 25 PCT FULL W/LUBRICANT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | RETAINER STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| MATT | MATERIAL | SHIELD STEEL |
| MATT | MATERIAL | BALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MFR REF ALL MATERIAL RESPONSES S313-13,12511 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHIELD MFR REF ALL MATERIAL RESPONSES S313-13,12511 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MFR REF ALL MATERIAL RESPONSES S313-13,12511 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MFR REF ALL MATERIAL RESPONSES S313-13,12511 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER MFR REF ALL MATERIAL RESPONSES S313-13,12511 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 12511-S313-13 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S313-13 | 40920 |
| SR4FCHH5 | 40920 |
| S313-13 | 59750 |
| S313-13 | 83086 |
| SFRA45PPK18/168 | 83086 |
| SFR45PPK18/168 | 83086 |
| SSRF-4ZZA5 | J1011 |
| SSRF-4ZZA5 | S0352 |
| S313-13 | 12511 |