NSN 3110-01-097-4975 · NIIN 010974975 · FSC 3110
NO DASHES 3110010974975
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.1552 AND INCHES MAXIMUM 0.1562 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1248 AND INCHES MAXIMUM 0.1250 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 0.4390 AND INCHES MAXIMUM 0.4400 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0280 AND INCHES MAXIMUM 0.0300 |
| AGVV | OUTER RING OUTSIDE DIAMETER | INCHES MINIMUM 0.3748 AND INCHES MAXIMUM 0.3750 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0002 AND INCHES MAXIMUM RADIAL 0.0008 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| FEAT | SPECIAL FEATURES | STABILIZED FOR OPERATION FROM M65 DEG F TO P250 DEG F,C56.0 TO C.64.0 ROCKWELL HARDNESS RINGS AND BALLS |
| LBMA | LUBRICATION MATERIAL | LUBRICANT |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-B-197 |
| MATT | MATERIAL | OVERALL STEEL COMP 440A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 73030-738048-1 |